Alex A. Pavlenko wrote: > The question is what does "8 routed interfaces" exactly mean? > Is it a maximum number of SVIs or routed ports that I can configure on a > switch? > What happens when I configure 9 or more SVIs? >
I've no direct answers to your questions. But I have had run a 3560G with about a dozen layer 3 interface and a few ACLs in "desktop vlan" mode. There wasn't any log message about it. But the performance wasn't very good (seemed traffic couldn't get faster than 50MBit/s) and the cpu usage was near 80% peaks all the time. Even if there was nearly no traffic the cpu usage was about 30%. After switching to "desktop access" performance became much better. The cpu usage stays under 10% even with 100MBit/s of routed traffic. Regards Mark _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
