You should try clock s internal first if you have SDH gear in the middle. Aaron
On Dec 12, 2007 9:17 AM, Ziad Majzoub <[EMAIL PROTECTED]> wrote: > Niels, are you suggesting clock source internal , on both ends ? > BTW there is definitely some SDH equipment on the path > regards > > > > On Dec 12, 2007 7:38 AM, Niels Bakker <[EMAIL PROTECTED]> wrote: > > > * [EMAIL PROTECTED] (Ziad Majzoub) [Tue 11 Dec 2007, 04:07 CET]: > > >I'm seeing underruns errors on local STM1 interface, > > >on the remote router i'm seeing runts, aborts and imput errors > > >the controller is clean(during a certain period). > > > > Try switching both to line clock source if there is SDH equipment > > inbetween (your use of 'remote' implies that). > > > > > > -- Niels. > > > > -- > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
