* [EMAIL PROTECTED] (Aaron) [Wed 12 Dec 2007, 16:57 CET]: >You should try clock s internal first if you have SDH gear in the middle.
Um, no. Exactly the opposite. Please read what I actually wrote: clock source line. Use internal on one side only if you have a back-to-back link only, or a carrier with rare, special needs. >On Dec 12, 2007 9:17 AM, Ziad Majzoub <[EMAIL PROTECTED]> wrote: > >> Niels, are you suggesting clock source internal , on both ends ? >> BTW there is definitely some SDH equipment on the path >> >> >> On Dec 12, 2007 7:38 AM, Niels Bakker <[EMAIL PROTECTED]> wrote: >>> * [EMAIL PROTECTED] (Ziad Majzoub) [Tue 11 Dec 2007, 04:07 CET]: >>>>I'm seeing underruns errors on local STM1 interface, >>>>on the remote router i'm seeing runts, aborts and imput errors >>>>the controller is clean(during a certain period). >>> >>> Try switching both to line clock source if there is SDH equipment >>> inbetween (your use of 'remote' implies that). >>> >>> >>> -- Niels. -- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
