Hi Guys, I am having some trouble with a dial solution that I am hoping someone can help me with. My current setup involves a dialup pstn modem on the aux port for the purpose of remote access. I am using ip unnumbered on the dialer interface so that it will borrow the IP of my inside fastethernet address on the router. I can dial in fine and I receive an IP address in the same subnet as the FA0/0 interface but I am only ever able to communicate with the gateway not any other devices on the inside subnet.
A host route is being installed for the dial in client so I am unsure as to why the traffic is not returned to the dial in client. Is there something I am missing here? Any ideas welcomed :) Cheers, Aaron. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
