Hi Adrian, This would account for the communication failure. I will check my configuration when I am next at work. If not its time to get the packet sniffers out :)
Thanks! Aaron. -----Original Message----- From: Adrian Chadd [mailto:[EMAIL PROTECTED] Sent: Sunday, December 16, 2007 3:50 PM To: Aaron R Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] Dialin problems On Sun, Dec 16, 2007, Aaron R wrote: > Hi Guys, > > I am having some trouble with a dial solution that I am hoping someone can > help me with. My current setup involves a dialup pstn modem on the aux port > for the purpose of remote access. I am using ip unnumbered on the dialer > interface so that it will borrow the IP of my inside fastethernet address on > the router. I can dial in fine and I receive an IP address in the same > subnet as the FA0/0 interface but I am only ever able to communicate with > the gateway not any other devices on the inside subnet. Have you disabled proxy-arp on that ethernet interface? In this configuration you'll have to enable it. Adrian _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/