Ack, that was a typo, your right, the subject line had it correct.. The query was on a 720xVXR/NPE-G2 series router. Will have to look at the 12.2 stuff, I think when I got the router it came with 12.4, so I just updated to the most current rev before deploying it in the network.
Talk about a bear getting rid of it, since trying to remove it from the config caused the crash, I had to write a replacement config without it to startup, and then reload. Still it would be nice to have some working cpp on the router. --- Howard Leadmon > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:cisco-nsp- > [EMAIL PROTECTED] On Behalf Of Saku Ytti > Sent: Sunday, December 16, 2007 3:56 AM > To: [email protected] > Subject: Re: [c-nsp] Control Plane Policing on 7206VXR/NPE-G2.. - Arrgha > crash.. > > On (2007-12-15 09:26 -0500), Howard Leadmon wrote: > > > Has anyone used a cpp on the 7606/NPE-G2? If so, did it work OK? Heck > and > > if it worked, care to share what you have done, so maybe I can implement > > something that actually works and doesn't crash everything. I guess for > now > > I'll just run it without one.. > > I run CoPP on many 760x's, if you ment 760x or NPE-G2. If you mean > 7206VXR/NPE-G2, then answer is no. I can't run CoPP in any other platform > than PFC3x based platforms, as MPLS labels aren't popped before CoPP > evaluation, meaning, with explicit-null, nothing can be protected > with CoPP. > Your case looks like software bug, no doubt. You might want to look > at crashinfo, or at very least feed it to output intepreter and > open TAC Case. You may also want to give 12.2(31)SB10 a go. > > -- > ++ytti > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
