> I have no problems logging in w/ SSH. And the problems are the same when > copying from a a Linux shell. > > Maybe SRB is just being stupid. :-)
Agreed. Further testing this morning shows I can send from SRB2 to SRA2 just fine, but from the very same router running SRB2 to another router running SRB2, it fails. Examining the aaa config on both, there is one difference: WORKS (running SRA2): aaa authorization commands 15 default group tacacs+ if-authenticated none BROKEN (running SRB2): aaa authorization commands 15 default group tacacs+ if-authenticated Keyword "none" is missing in 12.2(33)SRB2. broken(config)#aaa authorization commands 15 default group tacacs+ if-authenticated none ^ % Invalid input detected at '^' marker. broken(config)#aaa authorization commands 15 default group tacacs+ if-authenticated ? <cr> Any input on what "none" does, and why it seems to have be removed from 12.2 SRB? Thanks again _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
