if we are talking about hardware switching platforms then i believe it makes sense that it will only sniff process switched traffic, so why is it useless then?
IMHO, it is very difficult to design a router that will capture traffic being hardware switched, am i correct? On Jan 12, 2008 12:16 AM, Gert Doering <[EMAIL PROTECTED]> wrote: > Hi, > > On Fri, Jan 11, 2008 at 09:32:59PM +0000, [EMAIL PROTECTED] wrote: > > You can use debug ip packet and tie it to an access-list. > > > > rtr-1-minn#debug ip packet ? > > <1-199> Access list > > <1300-2699> Access list (expanded range) > > detail Print more debugging detail > > <cr> > > Which is close to useless, as it will only show process switched traffic. > > gert > -- > USENET is *not* the non-clickable part of WWW! > > //www.muc.de/~gert/ > Gert Doering - Munich, Germany > [EMAIL PROTECTED] > fax: +49-89-35655025 > [EMAIL PROTECTED] > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
