But on a simple router, to track down a problem for a few seconds... no logging console logging buffer xxxx debugging no ip route-cache on interfaces access-list to match or set interface condition debug ip packet detail <access-list> (dump).
would do fine? -lmn On Jan 12, 2008 8:04 AM, Gert Doering <[EMAIL PROTECTED]> wrote: > Hi, > > On Sat, Jan 12, 2008 at 03:21:09AM +0200, Kim Onnel wrote: > > if we are talking about hardware switching platforms then i believe it > makes > > sense that it will only sniff process switched traffic, so why is it > useless > > then? > > If you have process switched traffic, something is wrong with your > network setup. Some features just plain do not work without CEF (like > "MPLS"), others are horribly slow or cause insane amount of CPU load. > > > IMHO, it is very difficult to design a router that will capture traffic > > being hardware switched, am i correct? > > SPAN/RSPAN/ERSPAN exit and work very well :-) > > gert > -- > USENET is *not* the non-clickable part of WWW! > > //www.muc.de/~gert/ > Gert Doering - Munich, Germany > [EMAIL PROTECTED] > fax: +49-89-35655025 > [EMAIL PROTECTED] > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
