Hi list, When I was installing a new router I had the follow error:
Router# *Jan 31 16:27:46.067: NV: Invalid Pointer value(44AF40A0) in private configuration structure *Jan 31 16:27:46.107: NV: Invalid Pointer value(44AF40A0) in private configuration structure *Jan 31 16:27:46.107: %SYS-4-NV_BLOCK_INITFAIL: Unable to initialize the geometry of nvram In cisco Webpage I found the follow explanation: Error Message %SYS-4-NV_BLOCK_INITFAIL : Unable to initalize the geometry of nvram Explanation The software failed to initialize the NVRAM block geometry, which is a part of the NVRAM used to host nonconfiguration data files. Typically, these files are used by SNMP to store and retrieve nonconfiguration persistent data across a system reload. This failure may occur when the entire NVRAM is packed with the configuration, and the version of software that supports this feature could not find the minimum room in the NVRAM to initialize the block file system. Recommended Action Reduce the configurations in the NVRAM by at least by 2K. My question is: How can I performerd the Recommended Action, some command?, the file size of my configuration is 8767 bytes any ideas? Rgds. -- Omar E.P.T ----------------- Certified Networking Professionals make better Connections! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
