> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of omar parihuana > Sent: Thursday, January 31, 2008 12:22 PM > To: [email protected] > Subject: [c-nsp] %SYS-4-NV_BLOCK_INITFAIL > > Hi list, > > When I was installing a new router I had the follow error: > > > Router# > > *Jan 31 16:27:46.067: NV: Invalid Pointer value(44AF40A0) in private > > configuration structure > > *Jan 31 16:27:46.107: NV: Invalid Pointer value(44AF40A0) in private > > configuration structure > > *Jan 31 16:27:46.107: %SYS-4-NV_BLOCK_INITFAIL: Unable to > initialize the > > geometry of nvram > > > > In cisco Webpage I found the follow explanation: > > > Error Message > > %SYS-4-NV_BLOCK_INITFAIL : Unable to initalize the geometry of nvram > > Explanation The software failed to initialize the NVRAM > block geometry, > which is a part of the NVRAM used to host nonconfiguration data files. > Typically, these files are used by SNMP to store and retrieve > nonconfiguration persistent data across a system reload. This > failure may > occur when the entire NVRAM is packed with the configuration, and the > version of software that supports this feature could not find > the minimum > room in the NVRAM to initialize the block file system. > > Recommended Action Reduce the configurations in the NVRAM > by at least by > 2K. > > > My question is: How can I performerd the Recommended Action, > some command?, > the file size of my configuration is 8767 bytes > > any ideas? > > Rgds. > > -- > Omar E.P.T
Have you looked into 'service compress-config' yet? http://cisco.com/univercd/cc/td/doc/product/software/ios113ed/cs/csprtf/ csprtf2/cscfgfil.htm#xtocid140428 -evt _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
