Packets originating from the router can be controlled by: ip local policy route-map <name of the route map>
One thing I would try, but I have no idea if it works, is policy routing the traffic to a loopback interface that belongs to a VRF. The netflow export address would be the one inside the VRF, the source will be inside the global routing table, but the PBR would match udp to that address and port and set the next-hop to the loopback interface. Let's repeat: it's just an idea, not something from a reference or that had real testing. Rubens On Feb 3, 2008 12:06 PM, Phil Mayers <[EMAIL PROTECTED]> wrote: > > > > Checking my own MLS NDE configurations, it looks very similar - *but* > > I am not exporting to a VRF. So a possible issue could be that the PFC > > export isn't VRF capable. > > It isn't. Annoyingly. > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
