Hello,
My problem :) sorry. I retested by placing the capture machine in a VLAN and the VLAN in the global table. (placing it in a VRF and exporting to the VRF does not work) This way it worked and I got all flows I required. Thanks, Mihai >> From what I understand from you there is no workaround around this ? >> > > Not so - I am getting netflow from VRF interfaces. What I meant was, you > can't emit the netflow *packets* from a VRF interface. > > If you're really only getting software flows, check yuo have "mls nde > sender" configured: > > FWIW, my netflow-related config: > > > ip flow-export destination 155.198.63.88 6999 ip flow-export source > Loopback1 > ip flow-export version 9 mls flow ip interface-full mls nde sender int VlanXX > ip flow ingress > >> I mean other than placing a SPAN port or inline device there is no >> alternative to have something like netflow info regarding the local vrf >> interfaces ? (these are not even MPLS but only vrf lite) > > Netflow works with VRF interfaces. > > >> >> >> Thanks, >> Mihai >> >> > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
