I have bgp running between PE and CE. So on the PE, you do: router bgp xxxx address-family ipv4 vrf whatever neighbor y.y.y.y fall-over bfd Do the same for the CE under bgp. Then on the link between CE and PE, configured the bfd interval...etc. That should work.
The problem is my CE is a 1841 with a Channelized T1/PRI port and even with the latest 12.4.15T3, i can't put the bfd command under the serial interface! Without interface level bfd command, bfd won't work. Hello? I did try with an ethernet link between PE and CE, and bfd config looks good. -lmn On Feb 4, 2008 11:47 AM, Vikas Sharma <[EMAIL PROTECTED]> wrote: > Hi, > > Anyone have configured VRF aware BFD? If yes pls let me know how? > > Regards > Vikas Sharma > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
