Joseph,
If the channels are consecutive, just define your channel-group to
cover all the channels that go to a site as one serial interface.
channel-group # timeslots 1-8 speed ##k
Cory Councilman
[EMAIL PROTECTED] wrote:
> Date: Mon, 4 Feb 2008 15:25:21 -0800
> From: "Joseph Jackson" <[EMAIL PROTECTED]>
> Subject: Re: [c-nsp] PA-2T3+ don't want to use anymore multilinks
> To: Cisco <[email protected]>
> Message-ID:
> <[EMAIL PROTECTED]>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Opps I meant PA-MC-T3 interface cards. Silly me.
>
> On 2/4/08, Joseph Jackson <[EMAIL PROTECTED]> wrote:
>> Hey all,
>>
>> I have 2 PA-2T3+ at the end of a DS3. I am currently having to split all
>> the t1's off of it and then reform them in a MPPP bundle. Is there anyway
>> around this with those interface cards?
>>
>> Its not a full DS3 as a few channels are split off for voice but I'd like
>> to take all the remaining channels and just use them as one pipe instead of
>> these MPPP bundles which don't seem to be providing enough bandwidth.
>>
>>
>>
>> Thanks
>>
>> Joseph
>>
>
>
> ------------------------------
>
> _______________________________________________
> cisco-nsp mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
>
> End of cisco-nsp Digest, Vol 63, Issue 19
> *****************************************
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
