Can you be a little more clear on what "I can't do that" means? Can you not login to the standby? Can you not run a show ver on the standby? Is your failover working? What does show failover show when you run that on the active PIX?
On 6-Feb-08, at 11:05 AM, ultramajestic wrote: > For some reason, I can't do that, it is strange :-/ > > El mié, 06-02-2008 a las 08:25 -0500, Jason Lixfeld escribió: >> You can just log in to it (the passive/standby node) directly and >> do a >> show ver. >> >> On 6-Feb-08, at 8:15 AM, ultramajestic wrote: >> >>> Hi, is there anyway to see the serial number of a pix when it is >>> running >>> as the passive node? >>> >>> >>> _______________________________________________ >>> cisco-nsp mailing list [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
