I have an active and a passive pix failover configuration, the situation is that the passive node is not reachable, I can't do ping neither telnet.
I think I should go there with my laptop and serial cable since I am not sure if the serial number is available as stick :-/ El jue, 07-02-2008 a las 10:34 -0800, Jay Hennigan escribió: > Ziv Leyes wrote: > > How far away are you from that device? Can't you just plug a console cable > > to it and check? > > If he is close enough to plug in a console cable, he's probably close > enough to read the serial number on the nameplate. > > -- > Jay Hennigan - CCIE #7880 - Network Engineering - [EMAIL PROTECTED] > Impulse Internet Service - http://www.impulse.net/ > Your local telephone and internet company - 805 884-6323 - WB6RDV > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
