http://wiki.squid-cache.org/ConfigExamples/

My Hint: use a loopback address on the router, that seems to nail the GRE
endpoint to a fixed iP address rather than having it float depending on your
interface IPs.

(I keep meaning to fix the Squid WCCPv2 implementation to have "hooks"
to tear up/down the GRE based on the routers' negotiated routerid; but I
never quite get the time..)





Adrian

On Sun, Feb 10, 2008, Tuc at T-B-O-H.NET wrote:
> Hi,
> 
>       Is anyone running WCCP to a Linux Squid?
> 
>       I've got a 2851 running :
> 
> Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 
> 12.4(12), RELEASE SOFTWARE (fc1)
> 
>       Linux running:
> 
> Linux ports.example.com 2.6.9-42.0.10.EL #1 Tue Feb 27 09:24:42 EST 2007 i686 
> i686 i386 GNU/Linux
> 
>       And the latest 2.X squid.
> 
>       The doco TELLS me to do something like :
> 
> ip tunnel add wccp0 mode gre remote <ROUTER_HIGHEST_IP> local 
> <LOCAL_MACHINE_IP> dev eth0
> ip addr add <LOCAL_MACHINE_IP>/32 dev wccp0
> ip link set wccp0 up
> 
>       The problem is once I enable "ip wccp web" on the 2851,
> all the GRE packets come over the "eth0" interface, NOT "wccp0".
> 
>       Truthfully, I don't know how they are in the first place, can I just 
> claim there
> is a gre tunnel to a router and not have to declare it on the router itself? 
> Does WCCP
> just "make" an invisible tunnel?  
> 
>       In the squid debugging section they do say :
> 
> Run the most recent General Deployment (GD) release of the software train you 
> have on your router or switch. Broken IOS's can also result in broken 
> redirection. A known good version of IOS for routers with no apparent WCCP 
> breakage is 12.3(7)T12. There was extensive damage to WCCP in 12.3(8)T up to 
> and including early 12.4(x) releases. 12.4(8) is known to work fine as long 
> as you are not doing ip firewall inspection on the interface where your cache 
> is located.
> 
>       Could my 12.4(12) be "broken"?
> 
>               Thanks, Tuc
> _______________________________________________
> cisco-nsp mailing list  [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
- Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support -
- $25/pm entry-level VPSes w/ capped bandwidth charges available in WA -
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to