Hi,
Yup, been there, done that, got the solutions, everything looked
right but it still didn't work.... Until I turned off my Centos Firewall
rules. Then it purred like a kitten... So its actually not anything to do
with the router... (Atleast in my lab of the lab setup configuration).
Now I need to figure the right/proper way to edit the Centos
rules to allow the gre in properly without breaking their GUI for the
customer to use.
Though, I do like the idea of a loopback in the future.
Sorry to bother people here. I'll bother Adrian over on his
list. ;)
Thanks, Tuc
>
> http://wiki.squid-cache.org/ConfigExamples/
>
> My Hint: use a loopback address on the router, that seems to nail the GRE
> endpoint to a fixed iP address rather than having it float depending on your
> interface IPs.
>
> (I keep meaning to fix the Squid WCCPv2 implementation to have "hooks"
> to tear up/down the GRE based on the routers' negotiated routerid; but I
> never quite get the time..)
>
>
>
>
>
> Adrian
>
> On Sun, Feb 10, 2008, Tuc at T-B-O-H.NET wrote:
> > Hi,
> >
> > Is anyone running WCCP to a Linux Squid?
> >
> > I've got a 2851 running :
> >
> > Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
> > 12.4(12), RELEASE SOFTWARE (fc1)
> >
> > Linux running:
> >
> > Linux ports.example.com 2.6.9-42.0.10.EL #1 Tue Feb 27 09:24:42 EST 2007
> > i686 i686 i386 GNU/Linux
> >
> > And the latest 2.X squid.
> >
> > The doco TELLS me to do something like :
> >
> > ip tunnel add wccp0 mode gre remote <ROUTER_HIGHEST_IP> local
> > <LOCAL_MACHINE_IP> dev eth0
> > ip addr add <LOCAL_MACHINE_IP>/32 dev wccp0
> > ip link set wccp0 up
> >
> > The problem is once I enable "ip wccp web" on the 2851,
> > all the GRE packets come over the "eth0" interface, NOT "wccp0".
> >
> > Truthfully, I don't know how they are in the first place, can I just
> > claim there
> > is a gre tunnel to a router and not have to declare it on the router
> > itself? Does WCCP
> > just "make" an invisible tunnel?
> >
> > In the squid debugging section they do say :
> >
> > Run the most recent General Deployment (GD) release of the software train
> > you have on your router or switch. Broken IOS's can also result in broken
> > redirection. A known good version of IOS for routers with no apparent WCCP
> > breakage is 12.3(7)T12. There was extensive damage to WCCP in 12.3(8)T up
> > to and including early 12.4(x) releases. 12.4(8) is known to work fine as
> > long as you are not doing ip firewall inspection on the interface where
> > your cache is located.
> >
> > Could my 12.4(12) be "broken"?
> >
> > Thanks, Tuc
> > _______________________________________________
> > cisco-nsp mailing list [email protected]
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> --
> - Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support
> -
> - $25/pm entry-level VPSes w/ capped bandwidth charges available in WA -
>
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/