On Tuesday 12 February 2008, you wrote: > On Feb 12, 2008 2:52 PM, Ivan Gasparik <[EMAIL PROTECTED]> wrote: > > FE ports of ME3400 with default configuration have output queue > > limited to 48 packets. It's not enough for burstable traffic, > > especially when the uplink of your ME3400 runs at 1Gb/s. > > If you don't need any QoS, just attach a service-policy like: > > And what about GE ports and their default output queue size ? > > Is any command inside IOS to display queue limits on FE/GE ports ? > > Comparing ME-3400 queue limits to eg. Cat3560, what are default > queue limits on FE/GE ports on Cat3560 ?
Don't know if there is any command to display queue limit of an interface, but an empty policy map will help you. Just attach it to the interface. Just now I've test it on GE port, the default queue is the same - 48 packets. Look also at the page: http://cisco.com/en/US/products/ps6580/products_configuration_guide_chapter09186a00808de1e9.html You can find there many configuration examples and also notes about platform limitations. About 3560's I don't know too much, they have only limited QoS. Try to find some command of show mls qos ... to display queue sizes, browse the documentation or wait for someone to reply in this mailing list :) Ivan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
