You can try the following: "sh platform pm if-numbers" to find asic/class (under port) for each interface "sh platform qos debug port-class" to see the thresholds for each queue "sh platform port-asic stats drop" to see the drops for each queue
I don't know if there is an easier way (or the above is wrong), but the usual "sh mls qos" isn't working in ME-3400. - Tassos Robert Hass wrote on 13/2/2008 12:51 πμ: > On Feb 12, 2008 2:52 PM, Ivan Gasparik <[EMAIL PROTECTED]> wrote: >> FE ports of ME3400 with default configuration have output queue >> limited to 48 packets. It's not enough for burstable traffic, >> especially when the uplink of your ME3400 runs at 1Gb/s. >> If you don't need any QoS, just attach a service-policy like: > > And what about GE ports and their default output queue size ? > > Is any command inside IOS to display queue limits on FE/GE ports ? > > Comparing ME-3400 queue limits to eg. Cat3560, what are default queue > limits on FE/GE ports on Cat3560 ? > > Thanks > Robert > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
