Hello! Does anybody see such problems with running configuration building? Subject router is 7200-NPE-G1 under 12.2(25)S14, uptime about 17 weeks. Contact TAC? No other solutions?
Router#sh run % String too long to write to nvram (2098): Current configuration : 124735 bytes ! ! Last configuration change at 01:08:53 EET Mon Feb 18 2008 ! NVRAM config last updated at 01:08:53 EET Mon Feb 18 2008 ! version 12.2 parser config cache interface ... Router#sh run interface GigabitEthernet0/1.101 Building configuration... % String too long to write to nvram (2098): Current configuration : 5 bytes end Router# Router#sh startup-config | beg interface_GigabitEthernet0/1.101 interface GigabitEthernet0/1.101 encapsulation dot1Q 101 ip address X.X.X.1 255.255.255.0 ... Router#copy run start Building configuration... % String too long to write to nvram (2098):[OK] Router#sh startup-config | beg interface_GigabitEthernet0/1.101 Router# -- Dmitry Kiselev _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
