Tassos, DFC-3CXL is used with RSP720, while DFC-3BXL is used with SUP720. The DFC has to be matched with the RSP/SUP module, as it is basically a replica of the PFC.
Arie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tassos Chatzithomaoglou Sent: Wednesday, February 20, 2008 17:41 PM To: cisco-nsp Subject: [c-nsp] DFC-3BXL vs DFC-3CXL I'm looking for a document describing the differences between these 2 DFC modules. Looking through various CCO pages, the only difference i found was the number of mac addresses supported (64k vs 96k). Is there anything else i'm missing? Also, has anyone used DFC-3CXL with 67xx modules on a 6500/SUP720-3BXL system? I guess they get downgraded to 3BXL, but since their price is the same, why not get the newer ones? -- Tassos _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/