hi all - if by mistake a prefix list was added with the same sequence number, would there be any negative result?
the prefix list would be referenced in a route map which sets metric for hsrp-active/standby so if i have ip prefix-list HSRP-S seq 2 permit 10.10.10.0/27 and the following is added by mistake ip prefix-list HSRP-S seq 2 permit 10.10.11.0/24 would there be any impact? the related route maps look like this ! route-map ospf-connected permit 5 match ip address prefix-list HSRP-A set metric 50 set metric-type type-1 ! route-map ospf-connected permit 10 match ip address prefix-list HSRP-S set metric 100 set metric-type type-1 ! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
