Here it is below I have only put the Ip as I am trying to login to the PDM : PIX Version 6.3(3) interface ethernet0 auto shutdown interface ethernet1 auto shutdown nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname pixfirewall fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names pager lines 24 mtu outside 1500 mtu inside 1500 no ip address outside ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm no failover failover timeout 0:00:00 failover poll 15 no failover ip address outside no failover ip address inside pdm history enable arp timeout 14400 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local http server enable http 192.168.1.2 255.255.255.255 inside no snmp-server location
no failover ip address inside pdm history enable arp timeout 14400 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local http server enable http 192.168.1.2 255.255.255.255 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable telnet timeout 5 ssh timeout 5 console timeout 0 terminal width 80 Cryptochecksum:3412014cce8cca04731da9f09bf1fa32 : end -----Original Message----- From: William [mailto:[EMAIL PROTECTED] Sent: Monday, February 25, 2008 3:39 PM To: Peter Nyamukusa Cc: [email protected] Subject: Re: [c-nsp] Strange PIX interface problem Peter can you include a 'show run' ? On 25/02/2008, Peter Nyamukusa <[EMAIL PROTECTED]> wrote: > > Hi folks, > > I just reset a Pix 515E to factory default using the command "wr erase". > I am now trying to reconfigure it again and it looks like everything is > working fine except the interfaces I cannot seem to bring them up > When I type the command interface Ethernet 1 form the config prompt its > simply returns and does not change to PIX(config-if) there is also no error > deplayed. Just wondering if any one has come across this before or it could > just be a bug > > pixfirewall(config)# int e1 > pixfirewall(config)# sh int e1 > interface ethernet1 "inside" is administratively down, line protocol is down > Hardware is i82559 ethernet, address is 0012.7f5b.deee > IP address 192.168.1.1, subnet mask 255.255.255.0 > MTU 1500 bytes, BW 10000 Kbit half duplex > 305 packets input, 27324 bytes, 0 no buffer > Received 305 broadcasts, 0 runts, 0 giants > 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort > 0 packets output, 0 bytes, 0 underruns > 0 output errors, 0 collisions, 0 interface resets > 0 babbles, 0 late collisions, 0 deferred > 0 lost carrier, 0 no carrier > input queue (curr/max blocks): hardware (128/128) software (0/0) > output queue (curr/max blocks): hardware (0/0) software (0/0) > > Cisco PIX Firewall Version 6.3(3) > Cisco PIX Device Manager Version 3.0(1) > > Compiled on Wed 13-Aug-03 13:55 by morlee > > pixfirewall up 2 hours 3 mins > > Hardware: PIX-515E, 64 MB RAM, CPU Pentium II 433 MHz > Flash E28F128J3 @ 0x300, 16MB > BIOS Flash AM29F400B @ 0xfffd8000, 32KB > > Encryption hardware device : Crypto5823 (revision 0x1) > 0: ethernet0: address is 0012.7f5b.deed, irq 10 > 1: ethernet1: address is 0012.7f5b.deee, irq 11 > Licensed Features: > Failover: Enabled > VPN-DES: Enabled > VPN-3DES-AES: Disabled > Maximum Physical Interfaces: 6 > Maximum Interfaces: 10 > Cut-through Proxy: Enabled > Guards: Enabled > URL-filtering: Enabled > Inside Hosts: Unlimited > Throughput: Unlimited > IKE peers: Unlimited > > This PIX has an Unrestricted (UR) license. > > Serial Number: 808440708 (0x302fd384) > Running Activation Key: 0x2fab0bdd 0x7a16e505 0xc2402929 0x96e856cd > > > Cheers Peter > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
