On Friday 29 February 2008, Ali, Rijas: BB UAE (IT) wrote: > I just connected a Cisco 2811 se0/0/0 to a 128k Link > Modem ( LL) and fed the point to point IP address and > using default HDLC . Se0/0/0 is UP line Protocol is UP. > > I can not ping the local se0/0/0 from the Console and the > remote WAN IP. I have complete CDP information of the > remote router. > > I can ping from the LAN. Any clue?
Do you have any ACL's on the serial interfaces? Have you configured uRPF on any of the ACL's? Perhaps you want to paste a copy of your configuration. Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
