Its just a fresh Cisco 2811.. no ACLS....
sh runn Building configuration... Current configuration : 4747 bytes ! ! version 12.4 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone service password-encryption service sequence-numbers ! hostname zzzzzz ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings ! --More-- no aaa new-model aaa session-id common ! resource policy ! clock timezone GMT 4 clock summer-time BST recurring last Sun Mar 2:00 last Sun Oct 2:00 ip subnet-zero --More-- no ip source-route ip tcp synwait-time 5 ! ! ip cef ! ! no ip bootp server no ip domain lookup ip multicast-routing login block-for 120 attempts 5 within 30 login quiet-mode access-class 8 login on-failure every 5 ! username local password 7 1404071B1C54383F ! ! ! interface FastEthernet0/0 ip address 22.0.12.62 255.255.255.240 duplex full speed 100 ! --More-- interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 172.20.1.18 255.255.255.252 ! interface Serial0/0/1 no ip address shutdown clock rate 2000000 ! router rip version 2 network 172.20.0.0 ! ip classless ip route 0.0.0.0 0.0.0.0 172.20.1.17 no ip http server ip http authentication local ip http timeout-policy idle 60 life 86400 requests 10000 ! ! ! control-plane ALI RIJAS Network - Consultant Barclays Bank PLC 1st Floor, Building 4, Emaar Business Park, Sheikh Zayed Road, PO Box. 1891, Dubai, UAE (Dir): +971 4 3626703 (Mob): +971 50 6525497 (Fax): +971 4 3663133 (Email): [EMAIL PROTECTED] Weekend: Friday & Saturday Registered Office in England: Registered No. 1026167, Registered Office: 1 Churchill Place London E145HP -----Original Message----- From: Mark Tinka [mailto:[EMAIL PROTECTED] Sent: Friday, February 29, 2008 4:46 PM To: [email protected] Cc: Ali, Rijas: BB UAE (IT) Subject: [WARNING ! PGP Detected unable to content scan this message!] Re: [c-nsp] Can not Ping serial0/0/0 On Friday 29 February 2008, Ali, Rijas: BB UAE (IT) wrote: > I just connected a Cisco 2811 se0/0/0 to a 128k Link > Modem ( LL) and fed the point to point IP address and > using default HDLC . Se0/0/0 is UP line Protocol is UP. > > I can not ping the local se0/0/0 from the Console and the > remote WAN IP. I have complete CDP information of the > remote router. > > I can ping from the LAN. Any clue? Do you have any ACL's on the serial interfaces? Have you configured uRPF on any of the ACL's? Perhaps you want to paste a copy of your configuration. Mark. This e-mail and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose or otherwise act upon any part of this e-mail or its attachments. Internet communications are not guaranteed to be secure or virus-free. The Barclays Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any Internet communications by any third party, or from the transmission of any viruses. Replies to this e-mail may be monitored by the Barclays Group for operational or business reasons. Any opinion or other information in this e-mail or its attachments that does not relate to the business of the Barclays Group is personal to the sender and is not given or endorsed by the Barclays Group. Barclays Bank PLC.Registered in England and Wales (registered no. 1026167). Registered Office: 1 Churchill Place, London, E14 5HP, United Kingdom. Barclays Bank PLC is authorised and regulated by the Financial Services Authority. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
