What hardware are you using. From this display it looks like no power is available from the device
If this is on a Catalyst 4000 for instance even if the blade has PoE you need a separate power shelf to actually supply the PoE it does not take power from the system supply. Felix Nkansah wrote: > Hi All, > > This is to provide more info towards helping me solve the problem. > > When I do "show power inline" in the module, I get the output below in the > first lines. > > Module Available Used Remaining > (Watts) (Watts) (Watts) > ------ --------- -------- --------- > 1 n/a n/a n/a > > > > Felix > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
