try ip accounting on your interface, it won't impact your cpu much on a T1 link and will give you you top "IP" talkers, you probably want to append the output packets option to it to see who is downloading the most, a "sh ip accounting" will give you a list of IP's and byte counts for that interface.
Ben On 18/03/2008, at 4:24 AM, Brandon Price wrote: > I have a pretty simple requirement: > > Customer calls up and complains that their link (T1) is slow, > I take a quick look at MRTG for their link and see that it is at >95% > utilization. > > I would like a quick way see what traffic is saturating the link. > > It seems that Netflow Top talkers is what I want. I think. > > Unfortunatly none of the top-talkers commands are available on our > main > router which is a Catalyst 6513 (Sup7203B) running Version > 12.2(18)SXF12 > > Cisco feature navigator says that top-talkers is available on > 12.2(33)SXH1. > Unfortunatly all of our T1 customers connect in via PA-MC-T3 cards in > NON ENHANCED FlexWAN modules and I believe that support for the NON > ENHANCED FlexWAN has been dropped in 12.2(33). > > Is there any other way to accomplish the same thing? > > I tried downloading the Solarwinds Realtime Netflow viewer, and > configuring exports, but > For some reason I wasn't seeing all of the flows. It appeared that I > would only see the flows that > Were new since I started the capture, preexisting flows werent showing > up. > > I am a complete novice regarding Netflow so any advice would be > greatly > appreciated. > > Brandon Price > Sterling Communications Inc. > > /31 <--- The Subnet Formally Known as "Unusable" > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
