Sorry typo for Change of Authentication/Authorization Its now working
I did have "aaa server radius dynamic-author" configured to enable PoD - but with no explicit client configured. CoA only kicked in when I added an explicit "client yyy.yyy.yyy.yyy server-key xxxxx" line Goes back to Cisco inconsistencies as per the other thread I guess why one PoD works without an explicit client and CoA doesn't. Dean -----Original Message----- From: Tassos Chatzithomaoglou [mailto:[EMAIL PROTECTED] Sent: 22 March 2008 00:01 To: Dean Smith Cc: [email protected] Subject: Re: [c-nsp] CoA Support on LNS ? It's working fine in SB IOS. Check the "aaa server radius dynamic-author" command ;) Btw, CoA = change of authorization (aka push & pull). -- Tassos Dean Smith wrote on 22/3/2008 12:14 πμ: > Is Change of Authentication supported on a VPDN LNS ? (7200/7201 running SB > or SRC) > > > > I've found the Cisco docs relating to COA against an ATM LAC/BRAS but have > nothing against the LNS Side. > > > Would be really useful to be able to change the QoS policy on a > virtual-interface via Radius without dropping the connection (I do have PoD > working!). Debug shows the CoA packet is recognized but "COA: server not > enabled" > > > > Dean Smith > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
