I had PoD working without this command. I used "aaa pod server" instead.
-- Tassos Dean Smith wrote on 22/3/2008 11:15 πμ: > Sorry typo for Change of Authentication/Authorization > > Its now working > > I did have "aaa server radius dynamic-author" configured to enable PoD - but > with no explicit client configured. > > CoA only kicked in when I added an explicit "client yyy.yyy.yyy.yyy > server-key xxxxx" line > > Goes back to Cisco inconsistencies as per the other thread I guess why one > PoD works without an explicit client and CoA doesn't. > > Dean > > -----Original Message----- > From: Tassos Chatzithomaoglou [mailto:[EMAIL PROTECTED] > Sent: 22 March 2008 00:01 > To: Dean Smith > Cc: [email protected] > Subject: Re: [c-nsp] CoA Support on LNS ? > > It's working fine in SB IOS. Check the "aaa server radius dynamic-author" > command ;) > > Btw, CoA = change of authorization (aka push & pull). > > -- > Tassos > > > Dean Smith wrote on 22/3/2008 12:14 πμ: >> Is Change of Authentication supported on a VPDN LNS ? (7200/7201 running > SB >> or SRC) >> >> >> >> I've found the Cisco docs relating to COA against an ATM LAC/BRAS but have >> nothing against the LNS Side. >> >> >> Would be really useful to be able to change the QoS policy on a >> virtual-interface via Radius without dropping the connection (I do have > PoD >> working!). Debug shows the CoA packet is recognized but "COA: server not >> enabled" >> >> >> >> Dean Smith >> >> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
