Hi,
I would like to monitor the Optical Power in the Ten Gigabit interface.
I use this command : show int teX/y transceiver.
On some interfaces I've a answer :
1#sh int te2/1 transceiver
Transceiver monitoring is disabled for all interfaces.
ITU Channel not available (Wavelength not available),
Transceiver is internally calibrated.
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
Optical Optical
Temperature Voltage Current Tx Power Rx Power
Port (Celsius) (Volts) (mA) (dBm) (dBm)
------- ----------- ------- -------- -------- --------
Te2/1 38.5 0.00 7.9 -1.9 -3.0
But for another I have :
#sh int gi9/1 transceiver
Diagnostic Monitoring Data is not available.
Why this command failed on some interfaces ?
Regards,
Sébastien DAVID
Service Exploitation Réseau
Ecritel
site de Clichy : 7-9, rue Petit
92582 Clichy Cedex
Tél: 01.73.02.50.76
Fax: 01.47.56.04.48
Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
Site web: www.ecritel.fr <http://www.ecritel.fr/>
This message and any attachments (the "message") is intended solely for the
addressees and is confidential. If you receive this message in error, please
delete it and immediately notify the sender. Any use not in accord with its
purpose, any dissemination or disclosure, either whole or partial, is
prohibited except formal approval. The internetcan not guarantee the integrity
of this message. ECRITEL (and its subsidiaries) shall (will) not therefore be
liable for the message if modified.
---------------------------------------------
Ce message et toutes les pieces jointes (ci-apres le "message") sont etablis a
l'intention exclusive de ses destinataires et sont confidentiels. Si vous
recevez ce message par erreur, merci de le detruire et d'en avertir
immediatement l'expediteur. Toute utilisation de ce message non conforme a sa
destination, toute diffusion ou toute publication, totale ou partielle, est
interdite, sauf autorisation expresse. L'internet ne permettant pas d'assurer
l'integrite de ce message, ECRITEL (et ses filiales) decline(nt) toute
responsabilite au titre de ce message, dans l'hypothese ou il aurait ete
modifie.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
