Optics have to be DOM Compliant. http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compa tibility/matrix/OL_8031.html
http://tinyurl.com/2jedp2 David -- http://dcp.dcptech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of DAVID > Sébastien > Sent: Wednesday, March 26, 2008 9:44 AM > To: [email protected] > Subject: [c-nsp] Monitoring Tengigabit Interfaces > > > > Hi, > > > > I would like to monitor the Optical Power in the Ten Gigabit > interface. > > > > I use this command : show int teX/y transceiver. > > > > On some interfaces I've a answer : > > > > 1#sh int te2/1 transceiver > > Transceiver monitoring is disabled for all interfaces. > > > > ITU Channel not available (Wavelength not available), > > Transceiver is internally calibrated. > > If device is externally calibrated, only calibrated values > are printed. > > ++ : high alarm, + : high warning, - : low warning, -- : low alarm. > > NA or N/A: not applicable, Tx: transmit, Rx: receive. > > mA: milliamperes, dBm: decibels (milliwatts). > > > > Optical Optical > > Temperature Voltage Current Tx Power Rx Power > > Port (Celsius) (Volts) (mA) (dBm) (dBm) > > ------- ----------- ------- -------- -------- -------- > > Te2/1 38.5 0.00 7.9 -1.9 -3.0 > > > > > > But for another I have : > > > > #sh int gi9/1 transceiver > > Diagnostic Monitoring Data is not available. > > > > Why this command failed on some interfaces ? > > > > Regards, > > > > Sébastien DAVID > > > > Service Exploitation Réseau > > Ecritel > site de Clichy : 7-9, rue Petit > 92582 Clichy Cedex > Tél: 01.73.02.50.76 > Fax: 01.47.56.04.48 > Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > Site web: www.ecritel.fr <http://www.ecritel.fr/> > > This message and any attachments (the "message") is intended > solely for the addressees and is confidential. If you receive > this message in error, please delete it and immediately > notify the sender. Any use not in accord with its purpose, > any dissemination or disclosure, either whole or partial, is > prohibited except formal approval. The internetcan not > guarantee the integrity of this message. ECRITEL (and its > subsidiaries) shall (will) not therefore be liable for the > message if modified. > --------------------------------------------- > Ce message et toutes les pieces jointes (ci-apres le > "message") sont etablis a l'intention exclusive de ses > destinataires et sont confidentiels. Si vous recevez ce > message par erreur, merci de le detruire et d'en avertir > immediatement l'expediteur. Toute utilisation de ce message > non conforme a sa destination, toute diffusion ou toute > publication, totale ou partielle, est interdite, sauf > autorisation expresse. L'internet ne permettant pas d'assurer > l'integrite de ce message, ECRITEL (et ses filiales) > decline(nt) toute responsabilite au titre de ce message, dans > l'hypothese ou il aurait ete modifie. > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
