Saku Ytti wrote on 30/3/2008 5:44 μμ: > On (2008-03-30 10:29 -0400), Chris Griffin wrote: > >> Running 12.2.33SXH1 with SFP-GE-S style SFPs. Module 1 is a 6724. > > Weird, I got our SE find out this, and answer was the LAN blades > don't have hardware to read he higher addresses where this data is. >
According to http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_8031.html they're right. Next SXH version will probably "fix" it, as this seems one of the "it was never intended to be implemented" cases ;) Chris, can you try the "show interface transceiver supported-list" command please? -- Tassos > If this really is true, and I got misinformation back from cisco, > now only what I need is LAN card refresh that'll do 10/100/1000 > on copper SFP's. > >> show int transceiver >> Transceiver monitoring is disabled for all interfaces. >> >> If device is externally calibrated, only calibrated values are printed. >> ++ : high alarm, + : high warning, - : low warning, -- : low alarm. >> NA or N/A: not applicable, Tx: transmit, Rx: receive. >> mA: milliamperes, dBm: decibels (milliwatts). >> >> Optical Optical >> Temperature Voltage Current Tx Power Rx Power >> Port (Celsius) (Volts) (mA) (dBm) (dBm) >> ------- ----------- ------- -------- -------- -------- >> Gi1/9 39.8 3.27 4.8 -6.2 -6.1 >> Gi1/10 40.7 3.26 4.5 -5.6 -6.1 >> Gi1/11 40.0 3.27 4.4 -5.1 -6.5 >> Gi1/12 39.8 3.27 4.7 -5.8 -6.7 >> Gi1/13 40.0 3.27 4.3 -5.5 -5.5 >> Gi1/15 40.7 3.28 4.5 -5.5 -6.0 >> Gi1/16 40.7 3.28 4.6 -5.8 -5.1 >> Gi1/17 40.8 3.27 4.3 -5.5 -5.1 >> >> Also noticed in inventory: >> >> NAME: "Gi1/15", DESCR: "1000BaseSX" >> PID: , VID: , SN: >> >> NAME: "Gi1/15 Module Temperature Sensor", DESCR: "GigabitEthernet1/15 >> Module Temperature Sensor" >> PID: , VID: , SN: >> >> NAME: "Gi1/15 Supply Voltage Sensor", DESCR: "GigabitEthernet1/15 Supply >> Voltage Sensor" >> PID: , VID: , SN: >> >> NAME: "Gi1/15 Bias Current Sensor", DESCR: "GigabitEthernet1/15 Bias >> Current Sensor" >> PID: , VID: , SN: >> >> NAME: "Gi1/15 Transmit Power Sensor", DESCR: "GigabitEthernet1/15 >> Transmit Power Sensor" >> PID: , VID: , SN: >> >> NAME: "Gi1/15 Receive Power Sensor", DESCR: "GigabitEthernet1/15 Receive >> Power Sensor" >> PID: , VID: , SN: >> >> The release notes mention Digital Optical Monitoring (DOM) Phase 2 as a >> new feature. Is DOM now officially supported on the 6724?? >> >> -- >> Chris Griffin [EMAIL PROTECTED] >> Sr. Network Engineer - CCNP Phone: (352) 273-1051 >> CNS - Network Services Fax: (352) 392-9440 >> University of Florida/FLR Gainesville, FL 32611 >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
