I'm seeing the same behavior in SRB2 and have a TAC case open as well. Jim Munroe
-----Original Message----- From: Dmitry Kiselev [mailto:[EMAIL PROTECTED] Sent: Monday, March 31, 2008 3:50 AM To: Andrew Alston Cc: [email protected] Subject: Re: [c-nsp] 12.2 SRC opinions? Hello! On Sun, Mar 30, 2008 at 01:43:43PM +0200, Andrew Alston wrote: > Just thought I would add to the SRC issue list real quick. > > I've just had a router with SRC running on it do something really > weird (and painful). > > I changed a route-map to add an entry and permit an additional prefix. > > I soft cleared the bgp session outbound, prefix still refused to announce. > > I hard cleared the bgp session, it came back up, but then refused to > announce *ANY* prefix's > > I wrote the config, and did a reload. > > BGP session came back up and it announced all the original prefix's > but the new ones . I seen exactly the same bug... :( I already open a TAC case but still wait for solution. As workaround You may delete entire BGP neighbor configuration and recreate it again, no need to reload. I agree thats Cobra is very buggy and it should be used as last resort only software. -- Dmitry Kiselev _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
