On Apr 2, 2008, at 6:08 PM, Richard Morrell wrote: > > A customer would like to use an untagged VLAN across the ISL link on > the two 3560s and would like the link to be able to forward EAPS > frames. Will this work? Do it require any config to enable it?
you will need to use Q-in-Q tunnels as EAPS requires at least two vlans (one for the tagged control vlan, one or more for data). Also, I would recommend you set the failtimer expiry-action on the EAPS master node to open the secondary port when the failtimer expires. If you leave the failtime expiry-action to its default value, EAPS will not detect if a connection goes down while the ports on the switches stay up. When the action is set to open-secondary-port, the master node will open its secondary port as soon as it stops receiving control packets on its secondary port. --Daniel. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
