Hi Guys, I have a question that I simply cannot find an answer to on the Cisco site in regards to the CSM in Bridge mode. Is it possible to have the vserver (VIP) IP in a differnt subnet range than the real IP addresses in the serverfarm that is bound to it?
In other words, as an example a typical bridge configuration is like this: vlan 221 client ip address 10.20.220.2 255.255.255.0 gateway 10.20.220.1 ! vlan 220 server ip address 10.20.220.2 255.255.255.0 <<<<<<<<<<<<Two VLANs with the same IP address are bridged together>>>>>>>>>>>>>>>>>. serverfarm WEBFARM nat server no nat client real 10.20.220.10 inservice real 10.20.220.20 inservice ! vserver WEB virtual 10.20.220.100 tcp www serverfarm WEBFARM persistent rebalance inservice Is it possible to do something like this: vlan 221 client ip address 10.20.220.2 255.255.255.0 gateway 10.20.220.1 ! vlan 220 server ip address 10.20.220.2 255.255.255.0 <<<<<<<<<<<<Two VLANs with the same IP address are bridged together>>>>>>>>>>>>>>>>>. serverfarm WEBFARM nat server no nat client real 10.20.220.10 inservice real 10.20.220.20 inservice ! vserver WEB virtual 50.40.220.99 tcp www <<<<<<<<<< Place the IP address in a different subnet than the IP's in the serverfarm >>>>>>>>>>>>>>> serverfarm WEBFARM persistent rebalance inservice <<<<<<<<On the MSFC place a static route to route the 50.40.220.99 address towards the CSM IP on vlan 221>>>>>>>>>. ip route 50.40.220.99 255.255.255.255 10.20.220.2 Please if somebody knows if this is or is not possible it would be highly appreciated to hear your feedback. Regards, Brad _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
