Hey Chris,

Thanks for the reply,

Have you ever seen any documentation for this type of configuration on the
cisco website?

Regards,

Brad

On Tue, Apr 8, 2008 at 11:24 AM, Chris Riling <[EMAIL PROTECTED]> wrote:

> Yes, I do this all the time...
>
> Chris
>
>   On Mon, Apr 7, 2008 at 7:27 PM, Brad Case <[EMAIL PROTECTED]> wrote:
>
> >  Hi Guys,
> > I have a question that I simply cannot find an answer to on the Cisco
> > site
> > in regards to the CSM in Bridge mode.
> > Is it possible to have the vserver (VIP) IP in a differnt subnet range
> > than
> > the real IP addresses in the serverfarm that is bound to it?
> >
> > In other words, as an example a typical bridge configuration is like
> > this:
> >
> >
> >
> > vlan 221 client
> >  ip address 10.20.220.2 255.255.255.0
> >  gateway 10.20.220.1
> > !
> > vlan 220 server
> >  ip address 10.20.220.2 255.255.255.0
> > <<<<<<<<<<<<Two VLANs with the same IP address are bridged
> > together>>>>>>>>>>>>>>>>>.
> > serverfarm WEBFARM
> >  nat server
> >  no nat client
> >  real 10.20.220.10
> >  inservice
> >  real 10.20.220.20
> >  inservice
> > !
> > vserver WEB
> >  virtual 10.20.220.100 tcp www
> >  serverfarm WEBFARM
> >  persistent rebalance
> >  inservice
> >
> >
> >
> > Is it possible to do something like this:
> >
> > vlan 221 client
> >  ip address 10.20.220.2 255.255.255.0
> >  gateway 10.20.220.1
> > !
> > vlan 220 server
> >  ip address 10.20.220.2 255.255.255.0
> >  <<<<<<<<<<<<Two VLANs with the same IP address are bridged
> > together>>>>>>>>>>>>>>>>>.
> >
> > serverfarm WEBFARM
> >  nat server
> >  no nat client
> >  real 10.20.220.10
> >  inservice
> >  real 10.20.220.20
> >  inservice
> > !
> > vserver WEB
> >  virtual 50.40.220.99 tcp www   <<<<<<<<<<  Place the IP address in a
> > different subnet than the IP's in the serverfarm >>>>>>>>>>>>>>>
> >  serverfarm WEBFARM
> >  persistent rebalance
> >  inservice
> >
> >
> > <<<<<<<<On the MSFC place a static route to route the 50.40.220.99address
> > towards the CSM IP on vlan 221>>>>>>>>>.
> >
> > ip route 50.40.220.99 255.255.255.255 10.20.220.2
> >
> >
> > Please if somebody knows if this is or is not possible it would be
> > highly
> > appreciated to hear your feedback.
> >
> >
> > Regards,
> >
> > Brad
> > _______________________________________________
> > cisco-nsp mailing list  [email protected]
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>
>
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to