Hi
When connecting a CE to a PE, is there a minimum recommended BGP hold down timer. I am currently using 90 seconds with both of my carriers but it is causing applications to time out when there is a failure in one of the carriers network or if a local loop goes down. One of the carriers ruled out going down to 15 seconds, said it was too low. Thanks Tahir Uddin ----------------------------------------- The information contained in this transmission may be privileged and confidential and is intended only for the use of the person(s) named above. If you are not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, any review, dissemination, distribution or duplication of this communication is strictly prohibited. If you are not the intended recipient, please contact the sender immediately by reply e-mail and destroy all copies of the original message. Please note that we do not accept account orders and/or instructions by e-mail, and therefore will not be responsible for carrying out such orders and/or instructions. If you, as the intended recipient of this message, the purpose of which is to inform and update our clients, prospects and consultants of developments relating to our services and products, would not like to receive further e-mail correspondence from the sender, please "reply" to the sender indicating your wishes. In the U.S.: 1345 Avenue of the Americas, New York, NY 10105. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
