Yes, it supports it, in IOS. Tim At 10:56 AM 4/15/2008 +0200, Peter Rathlev observed: >Hi, Does anybody know if the WS-X6748-GE-TX does >MDI-X autosensing when running native IOS on >Sup720? I can't seem to find anything decisive >about the WS-X6748-GE-TX and IOS, but I can find >references to CatOS/WS-X6748-GE-TX and MDIX and >to the WS-X6548-RJ-45. Catalyst 6500 Series >Switch Module Guide "The WS-X6548-RJ-45 module >is auto-MDI/MDIX capable;" >http://www.cisco.com/en/US/products/hw/switches/ps708/products_module_configuration_guide_chapter09186a0080394e16.html#wp1050569 > >http://tinyurl.com/4n52cz Catalyst 6500 Series >Command Reference, 8.6 "With software release >8.2(1), auto-MDIX is also enabled on the >following modules: WS-X6748-GE-TX, Supervisor >Engine 7200 port 2 (RJ-45)" >http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/command/reference/set_m_pi.html#wp1045648 > >http://tinyurl.com/3m52lb The first page has >info on the WS-X6748-GE-TX, but doesn't mention >MDI-X near the module information. I don't have >any spare WS-X6748-GE-TX right now, so I can't >test it other than in production. (Which I will >have to do if nobody knows... :-) Thanks, Peter >_______________________________________________ >cisco-nsp mailing >list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/
Tim Stevenson, [EMAIL PROTECTED] Routing & Switching CCIE #5561 Technical Marketing Engineer, Data Center BU Cisco Systems, http://www.cisco.com IP Phone: 408-526-6759 ******************************************************** The contents of this message may be *Cisco Confidential* and are intended for the specified recipients only. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
