Tassos Chatzithomaoglou wrote: > Hi Phil, > > I have followed the instructions on CCO very carefully about GOLD and > these are my test results: > > If i do the same test on the same module with 3BXL (instead of 3CXL), > everything is working fine. > > I tried the same test on another 67xx module with another 3CXL and the > error reappeared. I replaced the 3CXL with a 3BXL and the error went away. > > Generally, i have 3 tried 3 different 6724-SFP/6748-GE-TX modules and > all of them return "Pass" when used with a 3BXL and "Fail" when used > with a 3CXL...and only for this specific test. > > I'm starting to believe that the combination of 7609/SUP720/3BXL & > 67xx/3CXL "confuses" this specific diagnostic test. I don't want to > think that there is a hardware problem with all these 3CXLs.
It's possible. I recall we ran into a diag that *always* failed on 6704 under SXF10, but succeeded under earlier releases. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
