On Tue, 2008-04-22 at 21:52 -0500, Jonathan Charles wrote: > We just deployed a 6513E with a Sup720. > > It is running IOS, but when it reboots it goes straight into rommon > and you need to type boot to get it to load... once you do that it > boots fine... > > My worry is that this site has power issues... > > Here is some output: > > 6513#sh boot > BOOT variable = sup-bootdisk:s3223-ipbase_wan-mz.122-18.SXF8.bin,12;
You're running an image for the Supervisor 32. Are you sure it's a Sup720? > CONFIG_FILE variable does not exist > BOOTLDR variable does not exist > Configuration register is 0x2102 > > Standby is not present. > 6513#sh log > > [output truncated] What exactly is truncated? Try pasting everythin including the ROMMON stuff. One problem I've had is that the IOS has "sup-bootdisk:XYZ.bin" as the boot image, but the ROMMON needs to see it as just "bootdisk:XYZ.bin". When booting, it says "invalid image" and then just chooses the first available image it can find. (Which until I saw this always happened to be the only image.) When you make it "boot", it gives you the exact string you need to append to your "boot system flash "-command in IOS. Changing the Sup-config-register is probably only possible from ROMMON. There, you write "confreg" to change it. Remember to "sync" before resetting. Regards, Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
