Hi all !
I want to configure a HWIC 2CE1T1-PRI with a Cisco 3825 (IOS
"c3825-adventerprisek9-mz.124-12.bin"), but when I try to configure it, I
always get an error message.
Here is the config and the error message:
Router#conf t
Enter configuration commands, one per line. End with
CNTL/Z.
Router(config)#network-clock-participate wic 0
WIC slot is empty or does not support clock participate
Router(config)#
Router(config)#
Please, could someone give me a solution for this problem ?
Best Regards
Tojo
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
