Had the same problem, I've change the way etherchannel load balances the link to: port-channel load-balance src-ip and every thing was ok after. Paul wrote: > Does anyone know how to make CEF load balancing work over etherchannels > and actually load balance on the etherchannel? > I have two GEC interfaces with 2 ports in each, and then I have two > routes multipath, one to each GEC interface > The problem is that the CEF algorithm is the same as the etherchannel > algorithm and each one of the etherchannels ends up only sending out one > of the two ports so it is not load balancing. I have tried changing > the port-channel load-balance setting to various things (I can not use > MAC because it's from one router to another) and I have tried changing > the cef load sharing algorithm. > Maybe this is a limitation of the 3750 platform? I have not tried this > on any of the other equipment. > > Paul > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ >
-- Dan Sabau Manager NOC Cluj New Com Telecomunicatii SA, Telefon: +40-740078983 Email: [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
