Did you tried on both ends of the portchannel? i'm running: Cisco IOS Software, C3750 Software (C3750-ADVIPSERVICESK9-M), Version 12.2(35)SE2, RELEASE SOFTWARE (fc1)
Paul wrote: > This doesn't work on 3750. I tried. Also tried changing cef algorithm > to universal 1 and also universal with some random hex... Apparently > even the src-ip follows the same rule as the CEF load balancing. > Too bad we can't change per port channel balancing :P > > Dan Sabau wrote: >> Had the same problem, I've change the way etherchannel load balances >> the link to: >> port-channel load-balance src-ip >> and every thing was ok after. >> >> Paul wrote: >>> Does anyone know how to make CEF load balancing work over >>> etherchannels and actually load balance on the etherchannel? >>> I have two GEC interfaces with 2 ports in each, and then I have two >>> routes multipath, one to each GEC interface >>> The problem is that the CEF algorithm is the same as the >>> etherchannel algorithm and each one of the etherchannels ends up >>> only sending out one of the two ports so it is not load balancing. >>> I have tried changing the port-channel load-balance setting to >>> various things (I can not use MAC because it's from one router to >>> another) and I have tried changing the cef load sharing algorithm. >>> Maybe this is a limitation of the 3750 platform? I have not tried >>> this on any of the other equipment. >>> >>> Paul >>> _______________________________________________ >>> cisco-nsp mailing list [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>> archive at http://puck.nether.net/pipermail/cisco-nsp/ >>> >> > > -- Dan Sabau Manager NOC Cluj New Com Telecomunicatii SA, Telefon: +40-740078983 Email: [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
