Since the 6500/7600 doesn't support TCP Flags, it can't do passive monitoring. So active monitoring must be done, IP SLA probes.
David -- http://dcp.dcptech.com > -----Original Message----- > From: Steve Feldman [mailto:[EMAIL PROTECTED] > Sent: Tuesday, May 13, 2008 5:16 PM > To: David Prall; [email protected] > Subject: Re: [c-nsp] Route Optimization/Control Options? > > > On May 13, 2008, at 1:16 PM, David Prall wrote: > > Have you looked at PfR > > > > http://www.cisco.com/go/pfr > > > > There is no cost except the configuration. So it would be > somewhere > > good to > > start. > > > > Has anyone out there successfully deployed PfR using 6500-series > equipment? > > We're considering it, but haven't started lab testing yet. > > And a related question: Ignoring PfR, is 12.2(33)SXH stable enough > for production use? (Nothing fancy, full BGP from ~5 neighbors.) > > Thanks, > Steve _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
