The 6500 can only perform the BR functions and can't perform the functions of
the MC. You'll need another IOS router to do that (1800/2800/3800/7200/etc).
Like David stated, PfR is free, so you could enable it without route control
(observe mode) just to get an overall assessment of your outgoing traffic
classes and their performance measurements. Then you can decide whether or not
to actually let the MC control your routing. PfR can also try(if configured)
to affect your incoming traffic, but this like anything else will depend on
what your ISP decides.
Message: 7
Date: Tue, 13 May 2008 17:23:45 -0400
From: "David Prall" <[EMAIL PROTECTED]>
Subject: Re: [c-nsp] Route Optimization/Control Options?
To: "'Steve Feldman'" <[EMAIL PROTECTED]>,
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="us-ascii"
Since the 6500/7600 doesn't support TCP Flags, it can't do passive
monitoring. So active monitoring must be done, IP SLA probes.
David
--
http://dcp.dcptech.com
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
