You can specify "neighbor <neighbor> allowas-in" to bypass this check. I'd proceed carefully if using it... as you are defeating one of the loop detection mechanisms, filter well.
-Jonathan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rudy Setiawan Sent: Tuesday, May 13, 2008 11:36 PM To: [email protected] Subject: [c-nsp] Using same AS number Hi all, As per BGP rule, that if a router sees its own AS in the path, it will filter them out of the prefixes. So if I have two locations with different providers and no direct connection to each other, what's the best way to be able to use the same AS and yet still sees the prefixes/routes? Thank you all in advance for the help. Regards, Rudy _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
