Thank you guys. I think I am going to try the allowas-in and see how it goes. :)
Regards, Rudy On Wed, May 14, 2008 at 2:04 AM, Jonathan Crawford <[EMAIL PROTECTED]> wrote: > You can specify "neighbor <neighbor> allowas-in" to bypass this check. I'd > proceed carefully if using it... as you are defeating one of the loop > detection mechanisms, filter well. > > -Jonathan > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rudy Setiawan > > Sent: Tuesday, May 13, 2008 11:36 PM > To: [email protected] > Subject: [c-nsp] Using same AS number > > > > Hi all, > > As per BGP rule, that if a router sees its own AS in the path, it will > filter them out of the prefixes. > > So if I have two locations with different providers and no direct > connection to each other, what's the best way to be able to use the > same AS and yet still sees the prefixes/routes? > > Thank you all in advance for the help. > > Regards, > Rudy > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
