That is correct. The AP will connect to the management interface, which will then direct it to one of the AP manager interfaces, verified on our equipment.
Thanks, Josh > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Joerg Mayer > Sent: Wednesday, May 21, 2008 4:01 PM > To: Rupert Finnigan > Cc: [email protected] > Subject: Re: [c-nsp] LWAPP Problems > > On Wed, May 21, 2008 at 08:55:39PM +0100, Rupert Finnigan wrote: > > the setup, and am really stumped as to what's going on. The AP's are > > assigned their IP's via DHCP with Option 43 configured, and > are all in VLAN > > 3, with the ap-manager interface configured appropriately. > I'm wandering if > > IIRC, the DHCP-server should hand out the Managment address, not the > AP-Manager address. > > ciao > Joerg > -- > Joerg Mayer > <[EMAIL PROTECTED]> > We are stuck with technology when what we really want is just > stuff that > works. Some say that should read Microsoft instead of technology. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
